Q: Pro Feature: How does the "Drop 1/3" switch work?

The Drop 1/3 switch is located on the left-hand side of the control panel. With the switch in the "1" drop position, one ball will feed through the system for every machine cycle as it does during the standard machine operation. With the switch in the "3" drop position, three balls will be fed through the system for every machine cycle providing rapid-fire pitching used primarily for bunting practice and vision drills, excellent for hand-eye coordination. Adjusting the position on the feeder switch will control the speed of the rapid-fire pitching. At the fastest feeder setting with drop 3 and no plugs the machine will fire a ball every second. When using the drop-1 mode two of the rotating holes in the feeder assembly need to be covered. Using the two plugs provided, place them in the two holes of the same color to prevent the balls from falling in these holes. The two plugs when not in use can be clipped to the key ring attached to the handle or placed in the accessory bag (new mid-2020)

Q: Pro Feature: How does Super Turbo work?

The Super Turbo switch is located on the right-hand side of the control panel. There are two positions, on and off. With the Super Turbo switch in the on position the machine will pitch the fastest speed when it’s in the high speed mode. Super Turbo is in effect when the on off switch is either in the on position or in the Turbo position. The speed of the feeder will increase slightly and all other pitch speeds will also increase as a result of the Super Turbo selection. When the Super Turbo switch is in the off position the main ON-OFF-TURBO switch is in effect.

Q: Pro Feature: How does the light dimmer work?

On MaxBP Pro machines, the light dimmer controls the brightness of the pitch indicator light on the front of the machine by turning the knob located next to the light. Turning the knob all the way clockwise will give the brightest light and turning it all the way counterclockwise will give the dimmest light, and on models since mid-2019 it can be turned off.

Question 1

Pro Feature: How does the "Drop 1/3" switch work?

Accepted Answer

The Drop 1/3 switch is located on the left-hand side of the control panel. With the switch in the "1" drop position, one ball will feed through the system for every machine cycle as it does during the standard machine operation. With the switch in the "3" drop position, three balls will be fed through the system for every machine cycle providing rapid-fire pitching used primarily for bunting practice and vision drills, excellent for hand-eye coordination. Adjusting the position on the feeder switch will control the speed of the rapid-fire pitching. At the fastest feeder setting with drop 3 and no plugs the machine will fire a ball every second. When using the drop-1 mode two of the rotating holes in the feeder assembly need to be covered. Using the two plugs provided, place them in the two holes of the same color to prevent the balls from falling in these holes. The two plugs when not in use can be clipped to the key ring attached to the handle or placed in the accessory bag (new mid-2020)

Question 2

Pro Feature: How does Super Turbo work?

Accepted Answer

The Super Turbo switch is located on the right-hand side of the control panel. There are two positions, on and off. With the Super Turbo switch in the on position the machine will pitch the fastest speed when it’s in the high speed mode. Super Turbo is in effect when the on off switch is either in the on position or in the Turbo position. The speed of the feeder will increase slightly and all other pitch speeds will also increase as a result of the Super Turbo selection. When the Super Turbo switch is in the off position the main ON-OFF-TURBO switch is in effect.

Question 3

Pro Feature: How does the light dimmer work?

Accepted Answer

On MaxBP Pro machines, the light dimmer controls the brightness of the pitch indicator light on the front of the machine by turning the knob located next to the light. Turning the knob all the way clockwise will give the brightest light and turning it all the way counterclockwise will give the dimmest light, and on models since mid-2019 it can be turned off.

Question 4

Wind is causing a problem with pitch accuracy, any suggestions?

Accepted Answer

The faster the pitch, the better your chances are of minimizing the effects of wind. Because it is a light weight plastic ball, wind over 15-mph is bound to effect the accuracy. Additionally, pitching with (same direction) the wind as opposed to across or against will improve accuracy and add velocity.

Question 5

Reaction Times for the Pro

Accepted Answer

Reaction Times for the Pro

Question 6

Reaction Times for the Original

Accepted Answer

Reaction Times for the Original

Question 7

Can I use the MaxBP to practice catching fly balls or ground balls?

Accepted Answer

Yes.
Fly balls require the use of our optional pop-up attachment because the machine can’t be tilted to far back or the balls will not feed through the machine. This is highly recommend for those 12 and under, a sure thing to save a few knots on the melon and build player confidence before transitioning to practicing with a hard ball.
The Pop-up attachment can be added to any machine at purchase. It is included in the package bundles. For ground balls you can use the machine on the ground our lower tripod and aim the machine slightly down. This also works well for cricket players to working to hit the throw/chuck from the bowler.

Question 8

Can the MaxBP work in the rain?

Accepted Answer

Probably not a good idea, like most pitching machines if the balls get wet they will slip as they go through the pitching wheels and be extremely erratic. Water can damage the machine and voids the warranty.

Training

The Differences between the MaxBP Original and the Pro Pitching Machine

10 types of CRAZY baseball parents and how they’re RUINING youth baseball

What I learned from Training with MLB Catcher Jose Lobaton